Frosted / Etch Film Cutting

We cut frosted and etch effect films from flat panels for privacy bands, logos and window graphics. Plotter and digital knife cutting for glass film panels up to 3000mm x 1500mm – dialled in for clean edges, easy weeding and installation-ready kits.

Get an Instant Quote Talk to an expert

Flat parts only — no folding Typical sheet up to 3000 × 1500 mm 1–5 days dispatch

Where frosted / etch film makes sense

Frosted and etch effect films deliver privacy, light control and branding on glass without sandblasting or permanent treatments. We mostly cut frosted film for:

Corporate Offices & Meeting Rooms
Privacy films for office glazing and conference rooms.

Retail Shopfronts & Centre Entries
Retail window treatments and entrance branding.

Medical, Education & Healthcare Fit-outs
Privacy solutions for healthcare and education facilities.

Hospitality & Hotel Glazing
Decorative and privacy films for hospitality venues.

Government & Council Buildings
Public sector glazing solutions and privacy films.

Shared Workspaces & Co-working Hubs
Flexible workspace privacy solutions.

Stairwells, Lobbies & Atriums
Decorative glazing for circulation spaces.

Compliance Privacy Bands & Safety Markings
Building code compliance and safety markings.

Architectural Feature Glazing & Balustrades
Decorative treatments for architectural glass.

General Interior Fit-out & Refurbishment Projects
Interior refurbishment and renovation projects.

Frosted / etch film characteristics

Frosted and etch films are translucent, self-adhesive window films that diffuse light while obscuring vision. Different films vary in opacity, texture and adhesive. We tune blade type, pressure and speed to match your film and detail level so edges stay crisp and weeding stays manageable.

Panels and sheets up to 3000mm x 1500mm

Material properties

Polymeric and cast frosted / etch effect films for flat glass.
Permanent adhesives for long-term installs; some removable options.
Subtle, uniform appearance designed to mimic sandblasted glass.

Best cutting methods

Plotter cutting (kiss-cut) for logos, shapes and privacy band details.
Digital knife cutting for laminated or thicker decorative films.
Carefully controlled pressures to cut film cleanly without scoring the liner.

For frosted and etch films we avoid laser cutting – knife and plotter cutting give the cleanest edge and best adhesive performance.

Panel size & formats

Flat panels up to 3000mm x 1500mm for most glazing sizes.
Roll-fed jobs broken into logical panels and drops for install.
We can cut plain frosted film or digitally printed etch films.

Frosted / Etch Film Cutting Capabilities

Accuracy, Nesting & Panel Size

Plotter-cut accuracy suitable for fine logo and pattern details.
Panels up to 3000mm x 1500mm, nested to match glazing sizes.
Panel splits planned for frames, mullions and on-site handling.
Registration to print marks where frosted film includes print.

We can work from vector artwork with cut paths, or help clean up and panel supplied files so they are ready for production.

Weeding, Masking & Kitting

Weeding of logo reveals, icons and negative-cut patterns.
Application tape applied for easy positioning on glass.
Kitting by room, level or zone for larger fit-outs.
Packing that keeps panels flat, clean and ready to install.

Our goal is to deliver frosted film sets that installers can unbox, position and apply with minimal sorting or guesswork.

Why specify frosted / etch film with Laser Cutting Experts

Glass graphics-focused workflow

Frosted film is all about lines, edges and alignment with frames. Our workflow is tuned for glass graphics – from panel layouts and band heights through to weeding small elements and labelling pieces for install.

Designed for installers and fit-out teams

We think in terms of rooms, levels and zones, not just sheets. Kits are organised so installers can work systematically down corridors and floors without stopping to decipher which panel goes where.

Comfortable with mixed-material fit-outs

Frosted film is often paired with signage, graphics, wall finishes and joinery. Because we also cut rigid panels and other materials, we can help align glazing graphics with broader signage and wayfinding schemes.

Trade-friendly for sign companies & builders

We regularly act as a wholesale cutting partner for sign shops, glazing contractors and builders. Clear communication, predictable turnaround and consistent quality are the focus, not competing for your clients.

Upload your DXF & get instant pricing

Get instant prices for laser-cut and CNC-cut parts across metals, plastics, composites and more — available 24/7.

1–5 days dispatch Australia-wide delivery Pickup: Botany NSW

Get an instant price

Launch the calculator to upload DXF, DWG or vector files and see live pricing for flat laser-cut parts. Pricing updates instantly based on material, thickness and cut time.

Open instant calculator

Accepted formats: DXF / DWG / AI / SVG / PDF (vector).

No CAD? We can help

Send measurements, sketches or existing parts and we’ll create cut-ready drawings, then quote via the same engine.

Request drawing help Email a brief →

Simple plates and brackets can often be drawn and quoted the same day.